As with the computer used in this installation guide (an HP Pavilion) the hinged frame holding the fan and power supply had to be unscrewed and moved to the side. So, you never know what you may encounter when you open your PC. Therefore, if you do not have the original operations manual for your PC, you should download one from your PC maker’s website prior to proceeding with the instillation of these Speaker Bay Adjusting Speakers.
Ok, so if you have the side removed from you computer, removed the empty bay insert, and located the unused internal power connector you are ready to begin. The first set of visuals below will enable you to test the speakers before you proceed further. You can click on each picture to enlarge it as necessary.
Step 1
Step 2 
Step 3
Step 4
Step 5
If the speaker light turns on and you hear the usual start up sounds then you have made all the right connections. Please note, you may need to raise the volume on the speaker if it lights up, but you do not hear anything.Once you are satisfied the speaker works, follow the next set of visuals to finalize the installation of your Speaker Bay Adjusting Speakers.
Step 1
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
If you run into trouble during this installation or if you have any further questions or problems, please feel free to send me an e-mail.If you arrived here and are interested in purchasing the Speaker Bay Adjusting Speakers which are the subject of this installation guide, please follow the link below for my listing on eBay.
Speaker Bay Adjusting Speakers 2.1 by Ziotek Item #230317161190
No comments:
Post a Comment